Shure SCM820 Digital IntelliMix Especificaciones descargar pdf (Pagina 33)

Audio Frequency Response

20 Hz to 20 kHz (±1 dB)

Dynamic Range

20 Hz to 20 kHz, A-weighted, typical

Analog-to-Analog 110 dB

Analog-to-Dante, Dante-to-Analog 113 dB

Output Noise (mix output / direct output)

20 Hz to 20 kHz, A-Weighted, one channel open

Output Pad

Line (-0dB) Aux (-20dB) Mic (-46dB)

−90 dBV −110 dBV −135 dBV

Equivalent Input Noise

20 Hz to 20 kHz, A-Weighted, input terminated with 150Ω, digital gain at +18 dB

Input Gain Setting

Line (+0dB) Mic (+26dB) Mic (+46dB)

−93 dBV −118 dBV −130 dBV

THD+N

1 kHz, +4 dBu out, mix output (MASTER) at +0 dB

<0.05%

Common Mode Rejection Ratio

150Ω balanced source, at 1kHz

>70 dB

Polarity

Non-inverting, any input to any output

Dimensions

44 mm x 483 mm x 289 mm (1.7 in. x 19.0 in. x 11.4 in.), H x W x D

Weight

5.5 kg (12.0 lbs)

Housing

Steel; Extruded aluminum

Power Requirements

100 to 240 V AC, 50-60 Hz, 1 A

Operating Temperature Range

−18°C (0°F) to 63°C (145°F)

Storage Temperature Range

−29°C (-20°F) to 74°C (165°F)

Analog Connections

Channel Input

Configuration Impedance

Clipping Level

Line (+0dB) Mic (+26dB) Mic (+46dB)

Active Balanced 5 kΩ +20 dBV −6 dBV −26 dBV

Phantom Power

48 V DC, selectable per channel, 14 mA max.

Mic level settings only. Phantom power automatically switched off in LINE position.

Aux Input

Configuration Impedance Clipping Level

stereo, unbalanced 10 kΩ +10 dBV

Mix Output

Configuration Impedance

Max Output Level

Line (-0dB) Aux (-20dB) Mic (-46dB)

Active Balanced 350 Ω +20 dBV 0 dBV −26 dBV

Direct Output

Configuration Impedance Max Output Level

Impedance Balanced 150 Ω +20 dBV

Headphone Output

6.35 mm (1/4") TRS, 100 mW, 350 Ω, dual mono (will drive stereo phones)

Digital Signal Processing

AD/DA Converter

24-bit, 48 kHz, 113 dB dynamic range typical

Internal Processing

32-bit

Latency

From channel input to mix output, Estimated Nominal, ±0.1 ms

Single Device ( ms) In a Link Group ( ms)

Analog to Analog 0.51 0.76 + 4T

Analog to Dante 0.29 0.54 + 4T

Dante to Analog 0.28 + T

0.53 + 5T

Dante to Dante 0.06 + T

0.31 + 5T

= Network latency in milliseconds, as set in the device preferences page or Dante Controller.

Note: Dante network latency is typically associated with the receiving device.

Channel Input Processing

Gain Adjustment Range −110 dB to +18 dB

Low Cut

Corner: 25 Hz to 320 Hz

Slope: 12dB/octave

High Shelf

Corner: 5 kHz

Slope: 12dB/octave

Gain: −18 dB to +18 dB

Mix Output Processing

Gain Adjustment Range −110 dB to +18 dB

Low Shelf

Corner: 25 Hz to 20 kHz

Slope: 12dB/octave

Gain: −18 dB to +18 dB

High Shelf

Corner: 25 Hz to 20 kHz

Slope: 12dB/octave

Gain: −18 dB to +18 dB

6-Band PEQ

25 Hz to 20 kHz, ±18 dB

Bandwidth: 1/70 to 4 octaves

Limiter

Ratio: 10:1

Threshold: −50dBFS to −2dBFS

Attack: 0.1 ms

Decay: 100 ms

Digital Feedback Reducer (DFR) Processing

Number of DFR Blocks 2

Number of Notch Filters 1 to 16 (default)

Notch Filter Bandwidth

High Q: 1/70th octave (Q=101)

Low Q: 1/40th octave (Q=58)

Notch Filter Depth 0 db to −18 dB in 0.5 dB increments

Networking

Network Interface

SCM820 Single Port, 10/100 Mbps Ethernet

SCM820-DAN Dual Port, Gigabit Ethernet, Dante digital audio

Cable Requirements

Cat 5e or higher, shielded, 100 m maximum

Network Addressing Capability

DHCP, link-local, static

Specifications

1 2 ... 28 29 30 31 32 33 34 35 36

Comentarios a estos manuales

Sin comentarios

Shure SCM820 Digital IntelliMix Especificaciones Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Mezcladores Shure SCM820 Digital IntelliMix