Shure M367 Especificaciones descargar pdf (Pagina 30)

TROUBLESHOOTING

o matter how well you plan ahead, sooner or later you will probably run

into an audio-related problem. To help you out in those situations,

we’ve listed some of the more common problems encountered in doing

audio-for-video, along with some possible solutions.

1. Buzz, hum, crackle, and other noises — These are almost always caused

by an electrical problem somewhere in the system. A low, steady buzz or

intermittent crackle usually indicates a loose ground wire, probably in or

near a connector. A humming sound is usually picked up by unbalanced

cables near light fixtures, dimmer switches, or power or loudspeaker

cables. You can try moving the mic cable around a bit, but the only

permanent solution is to use balanced microphone cables. If your

microphone is the unbalanced, high-impedance type, you can save

yourself some headaches by using an in-line transformer

which converts

Two methods for miking a conference table

Unidirectional

Omnidirectional

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Sin comentarios

Shure M367 Especificaciones Pagina 30